Vortex Perfluorinated Centrifugal Pump 15-30HP | Meibao MCP Series-Meibao Pump | China's Largest Corrosion-Resistant Pump Manufacturer

Product Dewspiption

The Meibao MCP Series Vortex Perfluorinated Centrifugal Pump is a high-performance industrial pumping solution designed for extreme chemical environments. Constructed entirely from premium PVDF (polyvinylidene fluoride) raw materials, this pump offers exceptional resistance to strong acids (up to 98% concentration), alkalis, high temperatures, and oxidation . The vortex volute design enables flow rates up to 230m³/h and pressures up to 4.8kg, making it ideal for large-scale corrosive fluid transfer. Equipped with a cooling water tank circulation protection system, the pump can operate idle without damaging mechanical seal components . The integrated base design ensures stability and long-term reliability in demanding industrial applications.

High Flow Capacity (Up to 230m³/h)

The main spiral flow channel vortex design effectively improves fluid passing efficiency, reduces internal energy loss, and achieves maximum flow rates up to 230m³/h .

High Pressure Performance (Up to 4.8kg)
Featuring a newly designed high-efficiency impeller with advanced hydraulic modeling, the pump can withstand pressures up to 4.8kg, making it suitable for high-pressure transfer applications .

True Idling Capability

Equipped with a cooling water tank circulation protection system, the pump can operate without liquid (dry running) without damaging the seal components .

Superior Corrosion & Temperature Resistance

Constructed from high-quality PVDF materials, the pump is resistant to a wide range of acids (including 98% concentration), alkalis, and organic solvents, with operating temperatures up to 90°C .

Reliable Sealing System

Features imported SSIC (Silicon Carbide) wear-resistant plates and PTFE expansion rings, ensuring reliable sealing performance and long-term stability .

Typical Applications

Chemical Processing: Transfer and circulation of strong acids, alkalis, and corrosive chemicals.

PCB Manufacturing: High-flow etching solution circulation.

Industrial Wastewater Treatment: High-volume corrosive effluent transfer and chemical dosing.

Electroplating Industry:Plating solution transfer and circulation.

Max Flow

117

m³/h

Max Head

Power Range

0.75-22.37

Certification

ATEX Optional

Technical Specifications

Model Range

MCP-125152 to MCP-125302 (Vortex)

Pump Type

Vortex Perfluorinated Centrifugal Pump

Materials

PVDF

Connection

Flange

Max Temperature

90°C

Max Pressure

4.8kg

Voltage

380V, 3Φ

Warranty

Model Coding System

MCP125202

MCP= Series

40 / 50 / 65 /80 / 100 =Inlet/Outlet Diameter (mm)

15, 20, 25, 30= Motor Horsepower (HP)

2, 4= Number of Poles

Material Options

PVDF

General chemicals, max90°C

PTFE

High purity, max -°C

VITON

High temp, max-°C

Detailed Parameter Table

Download PDF

Vortex Perfluorinated Centrifugal Pump.png

What is the maximum viscosity the MB pump can handle?

The MB magnetic drive pump is optimized for low-to-medium viscosity liquids (up to ~200 cPs at operating temperature). For high-viscosity media above 200 cPs, please contact our engineering team — we may recommend a reduced speed operation or a gear pump alternative.

Can the MB pump handle HF acid?

Yes. The MB pump with PTFE or PVDF wet-end is fully compatible with hydrofluoric acid at concentrations up to 50% and temperatures up to 80°C. PTFE offers the best HF resistance. For semiconductor-grade HF applications, we recommend our dedicated HF Series with ultra-pure material specifications.

What is the pump's NPSH requirement?

NPSH requirements vary by model and operating point. Typically, the MB series requires 2-3m NPSHa. We recommend ensuring the available NPSH (NPSHa) from your installation is at least 1m higher than the pump's required NPSHr. Full NPSH curves are available in the product datasheet.

Do you offer ATEX / explosion-proof versions?

Yes. ATEX Zone 1 and Zone 2 certified models are available for environments where flammable gases or vapors may be present. Please specify the ATEX zone and gas group (IIA, IIB, or IIC) when requesting a quote.

Can I get spare parts for this pump?

Yes. We stock a comprehensive range of spare parts for the MB series including magnet assemblies, impellers, shaft sleeves, and containment shells. Parts can be shipped within 5-10 working days to most destinations. We recommend ordering a spare parts kit with your initial order for critical applications.

View All FAQ Ask a Question

Vortex Perfluorinated Centrifugal Pump

Request Download PDF

Product Dewspiption

Typical Applications

Technical Specifications

Model Coding System

Material Options

Detailed Parameter Table

Related Products

MZK Stainless steel centrifugal pump

Idling Chemical Centrifugal Pump

Idling Chemical Centrifugal Pump

Perfluorinated Centrifugal Pump