Ultra-Pure Chemical Delivery Systems · Semiconductor-Grade Precision Pumping Technology-Meibao Pump | China's Largest Corrosion-Resistant Pump Manufacturer

Why PCB/Circuit Board Manufacturing

Ultra-Pure Chemical Delivery Systems · Semiconductor-Grade Precision Pumping Technology

Electronics and semiconductor manufacturing requires pumps with high cleanliness, chemical resistance, and stable performance. Meibao pumps are designed for demanding processes such as copper electroplating, chemical circulation, and wet cleaning, handling chemicals including TMAH, acids, alkalis, and plating solutions.

For PCB etching, stable flow and spray pressure are essential for consistent etching quality. Meibao corrosion-resistant centrifugal and metering pumps provide reliable chemical circulation and precise dosing for acidic and alkaline etchants.

In photovoltaic manufacturing, processes such as wafer texturing, edge isolation, and quartz tube cleaning involve highly corrosive chemicals such as HF, HNO₃, and KOH at elevated temperatures. Meibao vertical sump pumps and magnetic drive pumps provide corrosion resistance, stable operation, and leak-free chemical handling for wet-process equipment.

Talk to an Engineer View Products

Quick Reference

The Challenge

Key Challenges in Electronics & Semiconductor Fluid Handling

Electronics and semiconductor processes require extremely clean, stable, and reliable fluid handling. From trace metal contamination to chemical corrosion, flow pulsation, and temperature drift, even small variations can affect process quality and production yield. Meibao focuses on these critical challenges with high-purity, corrosion-resistant, and precisely controlled pumping solutions.

Ultra-Trace Metal Ion Contamination

In semiconductor wet processes, metal ion leaching must remain below 0.05 ppb. Conventional stainless steel pumps exposed to strong acids (HF, H₂SO₄) exhibit Fe, Cr, and Ni leaching rates of 5–20 ppb/hour, resulting in surface metal contamination > 1×10¹⁰ atoms/cm² and yield loss of 6%–12%. For ≤ 28 nm linewidth nodes, metal contamination tolerance drops further to < 0.01 ppb.

Long-Term Stability in Aggressive Chemicals

PCB etchant (2.0 mol/L HCl + 150 g/L Cu²⁺) at 55°C presents extremely high chloride ion activity—conventional engineered plastic pumps develop stress cracking within 3,000 hours. In PV manufacturing, 49% HF at 85°C attacks most metals and ceramics, limiting pump life to under 5,000 hours with 1.5–2 replacements/year, each outage costing USD 17,000–25,000 in lost production.

Flow Pulsation and Temperature Drift

Electroplating and etching demand flow stability ≤±0.5% and temperature accuracy ≤±0.5°C. Conventional gear pumps exhibit pulsation rates of ±3.2%, causing plating thickness variation > 5.0% and wasting 8%–15% of gold salts and photoresist. For 300mm wafer plating, reducing thickness COV from 7.2% to < 3.0% is the critical threshold for yield qualification.

Meibao Solutions

Advanced Pumping Solutions for Critical Wet Processes

Meibao provides high-purity pumping solutions designed to address the most demanding requirements in electronics and semiconductor manufacturing. From ultra-clean fluoropolymer flow paths to advanced anti-permeation sealing and precise VFD control, our solutions help maintain chemical purity, prevent leakage, and ensure stable process performance.

Ultra-High Purity Fluoropolymer Flow Path

MB-F and MB-MD Series wetted parts are injection-molded from high-purity PFA or PTFE, followed by 24-hour circulating rinse with 18 MΩ·cm UPW. ICP-MS verification guarantees Fe, Cr, Ni, Cu, and Zn leaching < 0.02 ppb each. Molding is performed in Class 100 cleanroom environments, preventing particle entrapment (> 0.1 μm) and achieving surface roughness Ra ≤0.4 μm to minimize particle adhesion.

Anti-Permeation Liner with Dual Barrier Seal

For HF and hot HCl service, MB-F pump liners are thickened to 8.0 mm (vs. standard 6.0 mm) with an additional 0.2 mm ETFE barrier layer—HF permeation rate reduced to < 0.01 g·mm/(m²·day). Static seals use Kalrez® 6375 perfluoroelastomer O-rings (rated to +240°C); dynamic sealing utilizes contactless magnetic coupling or dual mechanical seals with barrier fluid—zero leakage recorded over 8,000 hours continuous testing in 49% HF at 90°C.

Precision VFD Control with Low Pulsation

All MB-MD Series pumps are standard with PMSM (permanent magnet synchronous motors) + closed-loop vector control—flow regulation accuracy ±0.3% with response time < 50 ms. Impellers feature 7 backward-curved vanes with outlet angle 25°–30°—CFD-optimized flow pulsation reduced to ±0.8% (a 75% reduction vs. conventional pumps). The integrated PID temperature compensation module maintains plating bath temperature within ±0.3°C across –5°C to +85°C range.

Product Range

Recommended Pumps for
PCB/Circuit Board Manufacturing

Each pump model is available in multiple material configurations to match the exact chemical and thermal requirements of your process.

Metal Centrifugal Fan

Metal Fan, Centrifugal Fan, High Efficiency, Energy Saving, Corrosion Resistant, Streamline Impeller, Welded Steel Plate, Industrial Ventilation, VOCs Treatment, Boiler Draft, Dust Removal, Air Conditioning

View Details

FRP Direct-Coupled Centrifugal Fan

Direct-Coupled Fan, High Pressure Fan, FRP Fan, Centrifugal Fan, Corrosion Resistant, Compact Design, Low Energy Loss, Easy Maintenance, Chemical Ventilation, Laboratory Ventilation, Acid Alkali Resistant, Direct Drive

View Details

FRP Direct-Coupled Centrifugal Fan

Direct-Coupled Fan, FRP Fan, Centrifugal Fan, Corrosion Resistant, Compact Design, Low Energy Loss, Easy Maintenance, Chemical Ventilation, Laboratory Ventilation, Acid Alkali Resistant, Energy Saving, Low Noise, Direct Drive

View Details

GTF high pressure series fans

High Pressure Fan, FRP Fan, Centrifugal Fan, Corrosion Resistant, Acid Alkali Resistant, Energy Saving, Low Noise, Low Vibration, AMCA Certified, Chemical Exhaust, Waste Gas Treatment, High Pressure 4500Pa

View Details

View All Products

70%

Less Maintenance

%?20K

Annual Savings

Pumps Replaced

Leakage Events

Wastewater & Exhaust Gas Treatment India

AAL Electroplating Pickling Case Study-123

The Problem

A large automotive parts manufacturer operated 48 hard chrome plating tanks. Mechanical seal wear caused CrC/g contamination in the floor drainage. Three workers required medical attention from exposure. Annual mechanical seal replacement cost exceeded %?20,000.

Our Solution

How an Indian electroplating facility reduced downtime and acid-related corrosion by switching to PPH vertical pumps for mixed-acid pickling circulation.

The Result

Zero-Leakage Vertical Pickling Pump: 450 L/min, 7+ Months of Continuous Operation.

Related Industries

Explore Other Application Areas

Technical Consultation

Need Help Selecting the Right Pump for Your Process?

Our industry application engineers have direct process experience. Share your process data sheet and we'll provide a detailed pump recommendation with material selection, model number, and expected performance curve — typically within 48 hours.

Request Technical Consultation Get a Quote

Response Time

48-Hour Technical Reply

Expert Engineers

Direct Process Experience

Documentation

Performance Curves & PDS Included

Sample Lead Time

4-6 Weeks Standard

PCB/Circuit Board Manufacturing